#Motor
19 postsJanuary 2018 brain dump
Notes on dropping Evernote for are.na, TeamViewer alternatives, blockchain art, the Ice Cold Beer game, and a pile of bookmarks.
Read postVancouver Maker Faire 2017
What I brought to Vancouver Maker Faire 2017: the LED Pillar rhythm game, laser kaleidoscope, fox mask, thunderstorm cloud, and more.
Read postCNC Zen Garden - Vancouver Maker Faire 2016 Post Mortem
Post mortem of the CNC zen garden at Vancouver Mini Maker Faire 2016: shorts, skipped steps, and fixes that worked.
Read postThe Giant Claw Game! - Post Mortem
Post mortem on the Giant Claw Game: the claw broke on kid one, so I swapped it for a magnet on a string.
Read postThe Giant Claw Game! - Pictures
Build photos and notes on the Giant Claw Game cart, drill-motor pulleys, and cable tensioning.
Read postThe Giant Claw Game! - It Moves !
Video clip of the Giant Claw Game cart finally driving across the XY table under power.
Read postThe Giant Claw Game! - Problems
Status check on the Giant Claw one week before Maker Faire: claw and joystick done, gantry pulleys still slipping.
Read postThe Giant Claw Game! - Relay H-Bridge and Circuit Design
Building a relay H-bridge for the Giant Claw gantry motors after the L298 driver could not handle the current.
Read postThe Giant Claw Game! - The Controls System
Fighting mismatched salvaged drill motors, undersized L298 drivers, and slippery pulleys to get the claw gantry moving.
Read postThe Giant Claw Game! - The Gantry System
Switching the Giant Claw from a four-motor skycam to a two-motor CoreXY gantry with eight pulleys on top of the cube.
Read postThe Giant Claw Game! - The Claw, Prototype 3
Claw prototype three adds a geared motor, longer prongs, limit switches, and the wooden frame cube it lives inside.
Read postThe Giant Claw Game! - The Claw Research, Version 1
First cardboard and laser-cut attempts at a three-prong claw for the Giant Claw Game, plus links to designs that inspired the next pass.
Read postSpin Art - Vancouver Mini Maker Faire 2011
Rebuilt the giant spin art box with a belt drive and splash guard three days before Maker Faire, then ran out of paper by noon day two.
Read postRGB LED POV Globe - Status update and mechanical issues
Twelve days before Maker Faire the 6-foot POV ring bent under stress, so the build shrank to a bicycle rim.
Read postStatus update May 12, 2011
May 2011 update covering a burned out spin art motor, a DC trip to HacDC, and progress on the POV globe.
Read postGiant spin art - Maker Faire 2011 Vancouver
A giant spin art box built in a weekend from a junkyard washing machine motor for Maker Faire Vancouver.
Read postRGB LED POV Globe - Parts shopping
Parts haul for the RGB LED POV globe: 100 Piranha LEDs, sample TLC5947 drivers from TI, an OctoBrite board, and a junkyard AC motor.
Read postArduino Infrared, Blue Robot challenge, Burning man and superman
Working on the VHS Blue Robot IR beacon challenge, plus notes on WordPress 3.0, Burning Man, and upcoming Vancouver events.
Read postTool At General Motors Place
The band Tool plays General Motors Place in Vancouver on August 22, 2006 at 8 PM.
Read post