Blog, page 29
page 29 of 79Continuing through the writing archive.
Day 32 - Music thank you card
A laser-cut music thank-you card for a friend's wedding, 8 minutes to design and 45 seconds to cut.
Read postDay 33 - Painted fairy door
A painted fairy door test piece for an upcoming workshop, built from the template I made on day 24.
Read postDay 34 - Spades Panel
Test CNC cut of a spades panel for the Pocket Universe dome, designed by Adam Barlev and maybe too thin for the router.
Read postDay 31 - Laser branch panel
A 70cm laser-cut panel of tangled branches, made to drop into one of the CNC frame panels on the dome.
Read postDay 30 - Large picture frame CNC Panel
A larger picture-frame style CNC panel for the Pocket Universe dome, though I prefer the smaller one from day 29.
Read postDay 29 - Picture frame CNC Panel
A CNC-cut picture-frame panel for the Pocket Universe dome, with a hole in the middle for a laser-cut insert.
Read postDay 28 - Spiral panel CNC
Second CNC-cut panel for the Pocket Universe dome, a spiral design and my favourite so far.
Read postDay 28 - Hexagon Star CNC Panel
First CNC-cut hexagon star panel for the Pocket Universe dome, after a full day of fighting design issues at Maker Labs.
Read postDay 26 - L3D cube build
Built the L3D Cube kit, a small 8x8x8 RGB LED cube with a diffuser dome that is fun to play with.
Read postDay 25 - Maker business card
An abandoned maker business card design after the Maker Faire print sponsorship fine print proved unworkable.
Read post