Blog, page 27
page 27 of 76Continuing through the writing archive.
Day 21 - Arcade button midi control
Four hours of crimping and soldering get the day-3 arcade button MIDI controller wired to a Teensy and noisy.
Read postDay 20 - LEDs working Untztrument trellis midi kit
The Adafruit Untztrument trellis kit from day 4 with its LEDs and brain finally wired up and playing.
Read postDay 19 - failed maze panel
A maze-pattern Pocket Universe panel test where the paths only connect at one point, too fragile to keep.
Read postDay 18 - Failed array panel
A test-cut Pocket Universe panel that came out too flimsy to use, rejected.
Read postDay 17 - Tiny Star panel array
A dense tiny-star test panel for the Pocket Universe, likely too detailed for the ShotBot and due for a redesign.
Read postDay 16 - Star panel two
A second star-pattern test panel cut for the Pocket Universe dome project.
Read postDay 13 - Layered paper craft dragon
A layered paper shadow puppet picture frame cut on the VHS laser cutter as a test for more complex scenes.
Read postDay 15 - Arcade button panel
A test-cut Pocket Universe panel with arcade-button holes, half to be swapped for matching LEDs.
Read postDay 14 - Test polyhedron
A paper trapezohedron test for a planned set of twelve laser-cut wooden lantern shapes lit with LEDs.
Read postDay 12 - Test panels
Rejected paper panel designs for the Pocket Universe dome, one too flimsy and the others too plain to make the final cut.
Read post