Blog, page 28
page 28 of 79Continuing through the writing archive.
Day 44 - LEDs and Electronics installed in button panel
Wired LEDs and sound electronics into the button panel, with the Raspberry Pi triggering 50+ effects at once.
Read postDay 43 - Installing leds in the Hexagon star panel
Installed the LED strips behind the hexagon star panel from day 27, animations start tomorrow.
Read postDay 42 - All pixel build day
Built the AllPixel LED driver kit from Maniacal Labs to drive all the LEDs on the Pocket Universe dome.
Read postDay 41 - Pocket universe title card
The title panel for the Pocket Universe dome so people actually know what the project is called when they walk up.
Read postDay 40 - Hyperbolic triangle
A hyperbolic triangle panel cut as another piece for the Pocket Universe dome project.
Read postDay 39 - Inside of the dome
Inside the Pocket Universe dome: 3200 WS2810 LEDs across 10 networked Arduinos, with sound and buttons still to wire.
Read postDay 38 - Cthulhu panel
A Cthulhu panel for the Pocket Universe dome, planned to get a green-to-purple glow behind it for a demonic effect.
Read postDay 37 - Flower of life panel
The Flower of Life panel for the Pocket Universe dome, by far the most requested design when I asked for suggestions.
Read postDay 36 - Arcade button panel
An arcade button panel for the Pocket Universe dome, wired to lights and sounds and rebuilt after Maker Faire.
Read postDay 35 - Spades panel variant 2
A second variant of the spades panel test cut for the Pocket Universe dome, based on a design from Adam Barlev.
Read post