Blog, page 30
page 30 of 80Continuing through the writing archive.
Day 28 - Hexagon Star CNC Panel
First CNC-cut hexagon star panel for the Pocket Universe dome, after a full day of fighting design issues at Maker Labs.
Read postDay 26 - L3D cube build
Built the L3D Cube kit, a small 8x8x8 RGB LED cube with a diffuser dome that is fun to play with.
Read postDay 25 - Maker business card
An abandoned maker business card design after the Maker Faire print sponsorship fine print proved unworkable.
Read postDay 24 - Elven fairy door
A revised elven fairy door test cut that improves on the day 9 attempts for the NSG project.
Read postDay 23 - Spiral panel
A spiral Pocket Universe panel test cut in paper after running out of wood, designed by Adam Barlev.
Read postDay 22 - triangl line panel
A triangle-line Pocket Universe panel cut in wood on the VHS laser cutter, designed by Adam Barlev.
Read postDay 21 - Arcade button midi control
Four hours of crimping and soldering get the day-3 arcade button MIDI controller wired to a Teensy and noisy.
Read postDay 20 - LEDs working Untztrument trellis midi kit
The Adafruit Untztrument trellis kit from day 4 with its LEDs and brain finally wired up and playing.
Read postDay 19 - failed maze panel
A maze-pattern Pocket Universe panel test where the paths only connect at one point, too fragile to keep.
Read postDay 18 - Failed array panel
A test-cut Pocket Universe panel that came out too flimsy to use, rejected.
Read post