Blog, page 21
page 21 of 76Continuing through the writing archive.
Day 81 - Voronoi tower
A 20 by 10 inch laser-cut prototype of a voronoi pylon lantern, aiming for a 7-foot final version.
Read postDay 80 - Double 3D printed horn
Double 3D printed unicorn horns with glowing LEDs, built at VHS for a Burning Man costume.
Read postDay 79 - 3D printed horn
A glow-in-the-dark 3D printed unicorn horn for Burning Man, with colour-changing LEDs to be added later.
Read postDay 78 - Samuria Jack paper craft
A failed Samurai Jack layered paper cut with mixed-up layers and a too-small Aku, queued for another attempt.
Read postDay 77 - Little red riding hood paper craft
A Little Red Riding Hood layered paper scene with trees worth doing more of, plus a misplaced wolf.
Read postDay 76 - Princess Mononoke paper craft
Layered paper kodama from Princess Mononoke, with 5mm layer spacing that works better than the old 10mm.
Read postDay 75 - Moose layered paper craft
A layered paper moose with antlers too thin to stand up, popular enough on Instagram to deserve a second try.
Read postDay 74 - Iron giant layered paper craft
Two-layer and three-layer paper craft Iron Giant, with the two-layer version reading better.
Read postDay 73 - AT-Walker layered paper craft
A three-layer paper craft AT-AT with notes on tightening the 10mm layer spacing down to 5mm.
Read postDay 72 - fairy door workshop
Group photo from the fairy door workshop at VHS, with a longer write-up coming on the hackspace blog.
Read post